Datamax O'Neil H-8308P Instrukcja Operatora Pobierz pdf (Strona 32)

D. Route the ribbon up and around the Ribbon Take-Up Hub. Wrap the ribbon several

times clockwise (as indicated by the directional arrows) around the hub to secure it.

E. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.

F. Close the cover. With READY displayed, press the FEED Key until at least one gap (or

mark) advances.

Remove used ribbon when the Ribbon Roll is depleted: Pull the empty core from the

Ribbon Supply Hub. Grasp the used roll on Ribbon Take-Up Hub then pull and

squeeze to remove the spent ribbon. (To remove partially depleted rolls, cut the

ribbon then remove the roll as described above and discard any used ribbon.)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 115 116

Brak uwag

Datamax O'Neil H-8308P Instrukcja Operatora Strona 32