Datamax-oneil DPL Programmer’s Manual Instrukcja Użytkownika Pobierz pdf (Strona 93)

Extended System-Level Command Functions

(SA) SOP Adjust – This command sets the start of print (SOP) location, relative to

the top of form. See <STX>O for command details. The EX2 accepts this command for

backward compatibility only, limited in range (28-228).

(SC) Scalable Cache – This command sets the number of 1K blocks allocated for

the scaleable font engine. Available memory dependent upon model; see Appendix

(SE) SOP Emulation – This command enables the <STX>O and <STX>f print

positioning commands to allow backward compatibility with label formats designed

for other printers.

(SF) Save As Filename – This command, which may be sent separately or included

as the last command in an <STX>Kc command string, saves the effective printer

configuration to a file in Flash memory with a .dcm file extension.

(SG) Sensor Gain Value – This command sets the control of the voltage to the LED

emitter of the Media Sensor.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 295 296

Brak uwag

Datamax-oneil DPL Programmer’s Manual Instrukcja Użytkownika Strona 93