Datamax-oneil Performance series Present Sensor Instrukcja Użytkownika Pobierz pdf (Strona 5)

2 | Present Sensor Installation

Present Sensor Installation Guide 4

Present Sensor Installation Procedure

Note: Retain all hardware for reassembly.

1. Open the media cover assembly.

2. Loosen all three (3) 2.5mm hex head screws from the upper cover mount.

Note: For an easier re-installation, loosen but do not remove the screws.

Figure: 2 - 1 Upper Screws

3. Loosen and remove the three (3) 2.5mm hex head screws securing the right side

cover to the printer chassis.

Figure: 2 - 2 Right Side Screws

4. Lift and remove the cover assembly from the printer chassis.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Brak uwag

Datamax-oneil Performance series Present Sensor Instrukcja Użytkownika Strona 5