Datamax-oneil Workstation series User Guide Instrukcja Użytkownika Pobierz pdf (Strona 35)

57 Workstation Series User’s Guide

5 Cleaning and Maintenance

Overview

To maintain good print quality and increase printhead life, proper cleaning should be

routinely performed using factory-approved cleaning supplies.

Caution: A contaminated printhead can cause premature printhead failure.

Caution: Failure to clean the printhead as detailed in this manual could void the

printhead manufacturer’s warranty.

Intervals

The printhead should be cleaned whenever a roll of labels is replaced or every 650

inches printed.

Supplies

Caution: Cleaning should only be performed using factory-approved and authorized

cleaning supplies. Any use of non-authorized cleaning supplies can void the

printhead and platen roller warranties.

• Cleaning Pens

• Cleaning Cards/Film

• Can of Compressed Air

• Clean, lint-free cloth

• Isopropyl Alcohol

Cleaning the Top-of-Form Sensor

The Top of Form sensor should be cleaned whenever necessary.

1. Remove the media.

2. With a lint-free cloth, wipe both sensor covers to remove dust and debris.

3. Repeat as necessary.

Cleaning the Printhead

For optimum performance, the printhead should be routinely cleaned with factory-

approved cleaning supplies. When using the cleaning pen, follow the instructions located

on the packaging.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 44 45

Brak uwag

Datamax-oneil Workstation series User Guide Instrukcja Użytkownika Strona 35