Datamax-oneil H-Class Operator’s Manual Instrukcja Użytkownika Pobierz pdf (Strona 107)

H-Class 97

5.5.4 Cleaning the Media Sensing Components

Paper dust and adhesive from the media can accumulate on the sensing components and

produce TOF problems. To avoid problems, clean the Media Sensor and Light Bar as follows:

A. Turn OFF the Power Switch and unplug the power cord from the AC Receptacle.

B. Unlock the Printhead Latch, raise the Printhead Assembly, and remove media.

C. Using compressed air, clean all debris from the Media Sensor and the Light Bar. (In

cases of extreme buildup, a Cotton Swab or lens tissue dampened with isopropyl

alcohol can be used.)

5.5.5 Cleaning the Platen and Assist Rollers

Rollers contaminated with grit, label adhesive, or ink can lead to a decline in print quality

and, in extreme cases, cause labels to adhere and wrap the roller. Clean the Platen and

Assist Rollers as follows:

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 179 180

Brak uwag

Datamax-oneil H-Class Operator’s Manual Instrukcja Użytkownika Strona 107