Datamax-oneil Class Series II Programmer’s Manual Instrukcja Użytkownika Pobierz pdf (Strona 87)

Extended System-Level Command Functions

Class Series 2 Programmer’s Manual 73

(MCC) Module Command – This command adjusts the size of Flash module on the

optional Expansion Card according to the table below (see Appendix K for

appropriate module details):

Value Module Command Units / Interpretation

Zxx

Where xx =

Size: 1 – 7 Mbytes. This is the amount to be allocated to

Module Z; any remaining memory will be allocated to Module F.

Gxx

Where xx =

Size: 1 – 56, in 128 Kbytes blocks. This is the amount to be

allocated to Module G; any remaining memory will be allocated

to Module X.

Table 5-4: Module Command

(ML) Maximum (Label) Length – See <STX>M for command details.

(MM) Menu Mode – This command sets the menu access level of the printer –

where User is a basic listing of menu settings and controls, and Advanced is a full

menu listing.

(MT) Media Type – This command selects the printing method: Direct Thermal for

use with heat sensitive media or Thermal Transfer for use with media requiring a

ribbon to create an image. (For Non-Display models also see the <STX>KD

command.)

(MV) Mark Value – This command sets threshold value for the reflective media

sensor’s “mark” parameter.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 333 334

Brak uwag

Datamax-oneil Class Series II Programmer’s Manual Instrukcja Użytkownika Strona 87